Reprogeräte and accessoriesör
- White, color-neutral translucent underside
- Top side made of black stretch material
- 1 pair
Kaiser for repro lighting 5464, 5465 and 5565, 1 pair
- Non-reflective, matte gray coated base board with imprinted fine grid as well as cm and inch scale
- Camera arm horizontally adjustable
- Load capacity: max. 1.5 kg
Kaiser RS 2 CP
- Non-reflective, matt black base board with printed grid field
- Dimensions: base board: approx. 400x500x25 mm
- Height of guide column: 760 mm
- Height adjustment via friction drive
Kaiser RS-2 XA 5411
- Copylizer exe.cutive LED 5215
- Repro stand with integrated transmitted light unit
- Illuminated base plate with 270 SMD LEDs
- 5600 Kelvin daylight
- Light base plate (WxD): 63 x 55 cm
- Column height: 1 m
- max. load: approx. 4 kg
- incl. dust cover
Kaiser Copylizer executive LED
Free live consultation
Your individual consultation - from the comfort of your sofa
- Dörr repro stand H75
- Reprostand Set
- stepless height adjustment
- ideal for photographing documents, photos, slides and objects
- Base plate: 48 x 40 cm
- Column height: 82 cm
- Camera distance to plate: min. 22 cm/max. 75 cm
- Weight: 5,5 kg
- Center column loadable with approx. 10 kg
Dörr Stand Set H75
- Camera arm RA 1
- Device for positioning the camera, adjustable to different camera bodies
- Interchangeable connection thread B 1/4 / B 3/8
Kaiser RA-1 5520
- Camera arm RTX
- Camera arm with spirit level for fine adjustment
- Pivots 180° and can be locked in any position
- Camera can be mounted backwards or forwards
- Camera support horizontally adjustable via parallel guide with fine adjustment drive
- Exchangeable connection thread B 1/4 / B 3/8
Kaiser RTX 5522
- Novoflex Magic Studio Repro
- Macro repro rail
- Camera connection: 1/4 inch
- Column length: 49.5 cm
- Adjustment range: 41 cm
- max. clamping width: 5 cm
Novoflex MagicStudio Macro Repro Rail
- Non-reflective, matte black base board with grid field. Height adjustable feet
- Spirit level in base
- 70 mm wide low-vibration guide column made of matt black anodized aluminum profile with scale imprint
- Height adjustment with hand crank
- Camera arm with exchangeable connection thread (except RS 1 microdrive)
Kaiser RS-1 Microdrive
- Sturdy clamp with 1/4" thread
Novoflex Retaining clip
- non-reflective, matt gray coated base board with imprinted fine grid
- height adjustable feet
- Spirit level in the base
- wide and low-vibration guide column made of matt black anodized aluminum profile tube
- Height adjustment by means of friction drive with plastic bearings and hand crank
- Weight compensation via rolling spring
- Column can be mounted rotated by 180
- Height of guide column: approx. 1 m
Kaiser RS-1 with RT-1 5511
- Kaiser LED Illuminator RB 560 AL
- LED arrays: 2 x 272 SMD LEDs
- Color temperature: 5600 K
- Color rendering index: CRI = 95
- Illuminance* with soft lens: 6800 Lux, without soft lens: 8000 lux
- Power consumption: 2 x x{2264} 40 W
- Operating voltage: 24 V
- Light emission area of one luminaire: 58 x 16.5 cm
- Vertical rods: Length 76 cm / cross section 20 x 20 mm
Kaiser LED lighting device RB 560 AL
- Guide column made of special aluminum multi-chamber profile
- with manually height-adjustable camera support
- with printed cm and inch scales
- two locking screws for fixing
- Height adjustment with hand crank or motorized
- height-adjustable feet
- Spirit level on the base
Kaiser Repro stand RSD 1.2, column height 1.20 m, base board 68 x 57 cm, with manually height-adjustable camera carrier.
- Base board (WxHxD): approx. 900 x 38 x 730 mm
- Height of the guide pillar: approx. 1.80 m
- Column cross-section: 105 x 74 mm
- Maximum load: 8 kg
- Camera mounting plate: 130 x 78 mm
- Connection thread: B 1/4 / B 3/8 interchangeable
Kaiser RSD mot 18
- Novoflex MagicStudio Repro base plate acrylic glass
- MS-REPRO-PL
- Acrylic glass base plate
- suitable for MagicStudio Table 50
- the MagicStudio repro column can be clamped directly here
- Dimensions: 40 x 50 x 1.2 cm
Novoflex Base plate for MS-REPRO Transparent 40x50cm
Meaning of the delivery status
Immediately available
The item is in stock and can be shipped at short notice.
The item is also in stock in our shop in Düsseldorf.
Am Außenlager. Lieferzeit 4-6 Werktage nach Zahlungseingang
Der Artikel ist vor Ort in unserem Hauslager nicht vorrätig und wird nach erteiltem Kundenauftrag am Außenlager/beim Hersteller bzw. Distributor bestellt. Die zu erwartende Lieferzeit beträgt 4-6 Werktage.
Item has been ordered
The item has already been ordered from the manufacturer or distributor. The delivery time is usually between 1 week and 2 months. As soon as a more precise delivery time is known, we will publish the details on our website. After placing the order, you will be informed regularly about the delivery time.
Available at a specified date
The item has already been ordered from the manufacturer or distributor. We have been informed of the expected delivery date.
This item is ordered exclusively for you
The item is currently not in stock and will be ordered for you from the manufacturer or distributor after you have placed an order. The delivery time is usually between 1 week and 2 months. After placing the order, you will be informed regularly about the delivery time.
Item has been ordered. Delivery time 1-3 months
The item is currently not available. We were not given a delivery time. Experience shows that the expected delivery time is 1-3 months.
Currently not available
The manufacturer or supplier cannot confirm a date, so we assume a waiting time of 2 to 9 months. You can still order the item and secure your place on the waiting list.
Please note: Despite updating our website regularly, it is possible that an item may be out of stock but shown as available for a short time, especially when orders are high. All information is therefore without guarantee. We will inform you immediately if there is a delay in the expected availability/delivery time. The availability information refers to an order quantity of 1. Availability may vary for higher order quantities.