Reprogeräte and accessoriesör
- White, color-neutral translucent underside
- Top side made of black stretch material
- 1 pair
Kaiser for repro lighting 5464, 5465 and 5565, 1 pair
- Non-reflective, matte gray coated base board with imprinted fine grid as well as cm and inch scale
- Camera arm horizontally adjustable
- Load capacity: max. 1.5 kg
Kaiser RS 2 CP
- Non-reflective, matt black base board with printed grid field
- Dimensions: base board: approx. 400x500x25 mm
- Height of guide column: 760 mm
- Height adjustment via friction drive
Kaiser RS-2 XA 5411
- Camera arm RTX
- Camera arm with spirit level for fine adjustment
- Pivots 180° and can be locked in any position
- Camera can be mounted backwards or forwards
- Camera support horizontally adjustable via parallel guide with fine adjustment drive
- Exchangeable connection thread B 1/4 / B 3/8
Kaiser RTX 5522
Free live consultation
Your individual consultation - from the comfort of your sofa
- Copylizer exe.cutive LED 5215
- Repro stand with integrated transmitted light unit
- Illuminated base plate with 270 SMD LEDs
- 5600 Kelvin daylight
- Light base plate (WxD): 63 x 55 cm
- Column height: 1 m
- max. load: approx. 4 kg
- incl. dust cover
Kaiser Copylizer executive LED
- Camera arm RA 1
- Device for positioning the camera, adjustable to different camera bodies
- Interchangeable connection thread B 1/4 / B 3/8
Kaiser RA-1 5520
- Dörr repro stand H75
- Reprostand Set
- stepless height adjustment
- ideal for photographing documents, photos, slides and objects
- Base plate: 48 x 40 cm
- Column height: 82 cm
- Camera distance to plate: min. 22 cm/max. 75 cm
- Weight: 5,5 kg
- Center column loadable with approx. 10 kg
Dörr Stand Set H75
- Novoflex Magic Studio Repro
- Macro repro rail
- Camera connection: 1/4 inch
- Column length: 49.5 cm
- Adjustment range: 41 cm
- max. clamping width: 5 cm
Novoflex MagicStudio Macro Repro Rail
- Non-reflective, matte black base board with grid field. Height adjustable feet
- Spirit level in base
- 70 mm wide low-vibration guide column made of matt black anodized aluminum profile with scale imprint
- Height adjustment with hand crank
- Camera arm with exchangeable connection thread (except RS 1 microdrive)
Kaiser RS-1 Microdrive
- Sturdy clamp with 1/4" thread
Novoflex Retaining clip
- non-reflective, matt gray coated base board with imprinted fine grid
- height adjustable feet
- Spirit level in the base
- wide and low-vibration guide column made of matt black anodized aluminum profile tube
- Height adjustment by means of friction drive with plastic bearings and hand crank
- Weight compensation via rolling spring
- Column can be mounted rotated by 180
- Height of guide column: approx. 1 m
Kaiser RS-1 with RT-1 5511
- Device for positioning the camera
- Adjustment travel approx. 8 cm
Kaiser RTP for Copylizer
- Imprinted fine grid
- Individually height adjustable feet
- Dimensions (WxHxD): 450x28x500 mm
Kaiser 45x50cm 5517
- Kaiser guide pillar RDmot 1.8
- Column height: approx. 1.80 m
- Column cross-section: 105 x 74 mm
- max. load: 8 kg
- Camera mounting plate: 130 x 78 mm
- Connection thread: B 1/4 / B 3/8 interchangeable
Kaiser Guide column RDmot 1.8, 1.80 m, with motorized height-adjustable camera carrier
- Guide column made of aluminum multi-chamber special profile
- motorized height-adjustable camera support
- imprinted cm and inch scales
- two locking screws for fixing
- Cable remote control
Kaiser Guiding column Rdmot 1.2, height 1.20 m, with motorized height-adjustable camera carrier
- Holding device with glass pressure plate
- for the reproduction of books, magazines etc.
- also suitable for negatives in photo labs
- can be extended with camera holder
Kaiser Book holder 44/41, for books up to max 44 x 41 cm
- Studio kit for macro and product photography with professional cameras
- Ideal for objects up to approx. 22 x 22 cm
- Contains MS-MACRO-REPRO, MS 30 and 2x TS-KLAMMER
Novoflex Macro repro stand, studio kit
- Slide and negative duplicator
- For the exact positioning of slides and negatives of different formats
- With interchangeable format masks
- Ideal supplement for the MS-MACRO-REPRO variable repro stand
Novoflex Slide and negative duplicator for MS-MACRO-REPRO
- For mounting camera arms
Kaiser RA-RSP 4421
- Slide copying set
- consisting of a receptacle and a cover for an inverted color mixing head
- enables the use of any Kaiser color mixing head as an illumination device for slide copying
Kaiser Slide Copy Set
- Novoflex base plate white
- MS-REPRO-W
- suitable for MagicStudio
- Dimensions: 40 x 50cm
Novoflex Base plate for MS-REPRO 40x50cm
- Image Capture Set R2N CP
- Transportable camera tripod
- Daylight High Frequency Illuminator
Kaiser R2N CP
- 800 x 32 x 600 mm
Kaiser 80x60 cm
- Novoflex base plate translucent (frosted glass)
- MS-REPRO-T
- suitable for MagicStudio Table 50
- Dimensions: 40 x 50cm
Novoflex Base plate for MS-REPRO
- suitable for plates MS 80, MST 80
- Size: 60 × 80 × 23 cm
- Weight: 1,9 kg
Novoflex 60x80x23
- Camera arm RTX with adjustable and swiveling camera mount
- Interchangeable connection thread
- Dust cover included
Kaiser RSX 5512
- Reprostand Copykit - the ideal solution for high-quality reproduction and duplication
- Consists of the MS-MACRO-REPRO and the MS-FILMCOP
- Enables high-quality reproduction or duplication of slides and negatives as well as up to A4 originals with a professional camera
Novoflex MS-MR-COP Macro Reprostand Copykit
- Guide column made of special aluminum multi-chamber profile
- with manually height-adjustable camera support
- with printed cm and inch scales
- two locking screws for fixing
- Height adjustment with hand crank or motorized
- height-adjustable feet
- Spirit level on the base
Kaiser Repro stand RSD 1.2, column height 1.20 m, base board 68 x 57 cm, with manually height-adjustable camera carrier.
- Repro plate
- Metal base plate with non-slip carpet pad
- Surface in matt gray lacquer with 18% reflection for exposure determination
- Printed line grid with cm scales and DlN format markings
- Wall mounting possible
- Size of imprinted grid field: 460 x 340 mm
- Dimensions (WxHxD): 500 x 10 x 380 mm
- Including four template holders made of permanent magnetic plastic profile
Kaiser 5901
- Novoflex MS-Repro-Light
- LED array: 105 SMD LEDs
- Color temperature: 5600 Kelvin
- Color rendering index: CRI=95
- Beam angle: 110°
- Power consumption: 17 W
- Illuminance: 4300 lux (measured at the highest possible homogeneity of illumination of a DIN A4 document)
Novoflex 2 x repro lighting with flexible arms and ball head
- Set for high-quality reproduction and duplication, as well as macro and product photography with professional cameras
- Consists of MS-MACRO-REPRO, MS-FIMCOP, MS-REPRO-LIGHT, MS-REPLA, MS 30, TL-KLAMMER and PLATTE-M
- Enables slide and negative duplication of various formats
- Ideal for products up to approx. 22 x 22 cm
Novoflex Macro repro stand, complete set
- Kaiser close-up adapter
- suitable for camera tripod RSP rePRO
Kaiser Close-up adapter for reprographic stand RSP rePRO
- Kaiser LED Illuminator RB 560 AL
- LED arrays: 2 x 272 SMD LEDs
- Color temperature: 5600 K
- Color rendering index: CRI = 95
- Illuminance* with soft lens: 6800 Lux, without soft lens: 8000 lux
- Power consumption: 2 x x{2264} 40 W
- Operating voltage: 24 V
- Light emission area of one luminaire: 58 x 16.5 cm
- Vertical rods: Length 76 cm / cross section 20 x 20 mm
Kaiser LED lighting device RB 560 AL
- Novoflex MagicStudio Repro base plate acrylic glass
- MS-REPRO-PL
- Acrylic glass base plate
- suitable for MagicStudio Table 50
- the MagicStudio repro column can be clamped directly here
- Dimensions: 40 x 50 x 1.2 cm
Novoflex Base plate for MS-REPRO Transparent 40x50cm
- Copylizer lighting device RB 5270 DX
- 2x 161 specially selected white SMD LEDs
- Lights can be rotated, swiveled and adjusted in height
- vertical support arms with height markings, swivel in locking joints
- suitable for Copylizer (5215) and light base plate (5244)
- Color temperature: approx. 6000 Kelvin
- Color rendering index: CRI > 93
- Beam angle: 110°
- Illuminance without diffuser: 3000 lux
- Illuminance with diffuser: 2400 lux
Kaiser Copylizer lighting device RB 5270 DX
- Built-in spirit level
- Incl. fixing screw for the guide column and mounting material (metal counter plate and 4 M6x40 screws for table worktops with 28 to 32 mm thickness)
Kaiser Base for 70 mm wide column, e.g. for 4407-09, 4474-78
- Non-reflective, matt black base board
- 45x28x50 cm, with printed grid and spirit level
- Height adjustment with weight compensation
- Connection thread 1/4" and 3/8
Kaiser RS-1 with RA-1 5510
- Kaiser book holder 69/50 AR (anti-reflective) 5774
- with extra-white, anti-reflective glass pressure plate on both sides
- the interference-optical coating ensures high color neutrality
- minimal residual reflection (< 0.5 %)
- max. original size: 69 x 50 cm, e.g. also for newspapers with Berlin or Swiss format (opened 630 x 470 mm or 640 x 475 mm)
- max. original height: 145 mm
- External dimensions (WxHxD): 76.9 x 22.6 x 55.4 cm
Kaiser Book holder 69/50 AR (antireflex)
- Novoflex mounting table 60x50x23cm
- especially for plates MS 50, MST 50
- Size: 60 x 50 x 23 cm
- Weight: 1.5 kg
Novoflex MagicStudio recording table for MS 50
- Retaining rods
- with adjustable holding arms
Kaiser 5560
- Base board (WxHxD): approx. 900 x 38 x 730 mm
- Height of the guide pillar: approx. 1.80 m
- Column cross-section: 105 x 74 mm
- Maximum load: 8 kg
- Camera mounting plate: 130 x 78 mm
- Connection thread: B 1/4 / B 3/8 interchangeable
Kaiser RSD mot 18
- Kaiser wooden base plate for shooting table
Kaiser for shooting table
- LED arrays: 2 x 272 SMD LEDs
- Color temperature: 5600 K
- Color rendering index: CRI = 95
- Beam angle of the LEDs: 100°
- Illuminance* with soft lens: 6800 lux, without soft lens: 8000 luxwithout soft lens: 8000 lux
*measured at the highest possible homogeneity of illumination of a DIN A3 document - Operating voltage: 24 V
Kaiser LED lighting device RB 570 AX
- Repro and title arm RT 1
- Camera mounting points for landscape and portrait format shots
- with exchangeable connection thread B 1/4 / B 3/8 and rubber pads
- Camera support can be moved horizontally via parallel guide and fixed in any position
- Entire repro and title arm swivels for reproducing vertical originals
Kaiser RT-1 5521
- Fluorescent lamp
- 36 watt
- 5400 K
Kaiser for RB 5004
- for RD guide pillars 5620, 5622, 5623
Kaiser Base for RD guide columns 5620, 5622, 5623
- Repro stand and microscope slide in one
- Can be dismantled in a few simple steps and is suitable for mobile use
- Ideal for reproducing A4 originals, for example, as well as for product and macro photography
Novoflex Compact, dismountable macro repro stand
- Base board (WxHxD): approx. 680 x 38 x 570 mm
- Height of the guide pillar: approx. 1.20 m
- Column cross-section: 105 x 74 mm
- Maximum load: 8 kg
- Camera mounting plate: 130 x 78 mm
- Connection thread: B 1/4 / B 3/8 interchangeable
Kaiser RSD
Exklusiv im Düsseldorfer Geschäft erhältlich.
- Lamp sockets RB 3
- Supply line: 2 x 2 m, with intermediate cord switch
- 2 pieces
- without lamps
Kaiser 5563
- movable
- adjustable stops
- Landscape or portrait format
Kaiser RLR
Meaning of the delivery status
Immediately available
The item is in stock and can be shipped at short notice.
The item is also in stock in our shop in Düsseldorf.
Am Außenlager. Lieferzeit 4-6 Werktage nach Zahlungseingang
Der Artikel ist vor Ort in unserem Hauslager nicht vorrätig und wird nach erteiltem Kundenauftrag am Außenlager/beim Hersteller bzw. Distributor bestellt. Die zu erwartende Lieferzeit beträgt 4-6 Werktage.
Item has been ordered
The item has already been ordered from the manufacturer or distributor. The delivery time is usually between 1 week and 2 months. As soon as a more precise delivery time is known, we will publish the details on our website. After placing the order, you will be informed regularly about the delivery time.
Available at a specified date
The item has already been ordered from the manufacturer or distributor. We have been informed of the expected delivery date.
This item is ordered exclusively for you
The item is currently not in stock and will be ordered for you from the manufacturer or distributor after you have placed an order. The delivery time is usually between 1 week and 2 months. After placing the order, you will be informed regularly about the delivery time.
Item has been ordered. Delivery time 1-3 months
The item is currently not available. We were not given a delivery time. Experience shows that the expected delivery time is 1-3 months.
Currently not available
The manufacturer or supplier cannot confirm a date, so we assume a waiting time of 2 to 9 months. You can still order the item and secure your place on the waiting list.
Please note: Despite updating our website regularly, it is possible that an item may be out of stock but shown as available for a short time, especially when orders are high. All information is therefore without guarantee. We will inform you immediately if there is a delay in the expected availability/delivery time. The availability information refers to an order quantity of 1. Availability may vary for higher order quantities.